Available Finishes

Chrome

Brushed Nickel

Sirius- 1 Handle Shower & Tub Mixer - TRIM KIT ONLY

• Chrome
• For use with Gerber- Treysta™ 1 Handle Shower & Tub - Rough-In Valves (any G00GS50... or G00GS52... series valve), see chart below
• Handle and valve escutcheon
• Includes Treysta™ ceramic disc pressure balance cartridge
• Finish-matched deep wall extension kit (D113001) sold separately
• Finish-matched shallow wall extension kit (GA663B11) sold separately
• Add optional Shower Diverter Valve (1/2" Ports) to allow independent control of multiple showerheads (and tub spout), sold separately, see chart below

Pressure balance valves reduce the risk of scalding by ensuring that the water temperature stays within a safe 3º F (1.5º C). Most municipalities now require a pressure balanced system when applying for a permit for new construction or remodel.

Note: This exterior "Trim Kit" requires in-wall installation of compatible Gerber Treysta™- 1 Handle Shower & Tub- Rough-In Valve, SOLD SEPARATELY.

For Use With Gerber:
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
HORIZONTAL Inputs
WITH Service Stops
OR
1/2" IPS/Sweat 
Cold Expansion PEX 
Crimp PEX 
 G00GS505S
 G00GS507S
 G00GS504S
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
HORIZONTAL Inputs
WITHOUT Service Stops
OR
1/2" IPS/Sweat 
Cold Expansion PEX 
Crimp PEX 
 G00GS505
 G00GS507
 G00GS504
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
HORIZONTAL Inputs
WITH Service Stops
• With STUB-OUT for tub spout
OR
1/2" IPS/Sweat 
Cold Expansion PEX 
Crimp PEX 
 G00GS505ST
 G00GS507ST
 G00GS504ST
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
HORIZONTAL Inputs
WITHOUT Service Stops
• With STUB-OUT for tub spout
OR
1/2" IPS/Sweat 
Cold Expansion PEX 
Crimp PEX 
 G00GS505T
 G00GS507T
 G00GS504T
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
VERTICAL Inputs
WITH Service Stops
OR
Cold Expansion PEX 
Crimp PEX 
 G00GS527S
 G00GS525S
Treysta™ 1 Handle Shower & Tub- Rough-In Valve
VERTICAL Inputs
WITHOUT Service Stops
Cold Expansion PEX 
Crimp PEX 
 G00GS527
 G00GS525
OPTIONAL
Sirius®- Shower Diverter Valve (1/2" Ports) & Thermostatic Shower Volume Control / Shut-Off Valve (3/4" Ports)- Trim Kit
+
3-Port (3-Position) Shower Diverter (1/2" Ports) - Rough-In Valve
OR
3-Port (4-Position) Shower Diverter (1/2" Ports) - Rough-In Valve
OR
4-Port (8-Position) Shower Diverter (1/2" Ports) - Rough-In Valve
 
 D560944T
 
 
+
 D130515BT
 
OR
 D130510BT
 
OR
 D130010BT
 
Cold Exansion PEX - F1960
Crimp PEX - F1807
• UPC / cUPC
• NSF 61-9
• Energy Policy Act of 1992
• ASME A112.18.1
• ADA Accessibilty Guidelines for Building and Facilities - 4.27.4 Controls and Mechanisms
• Pressure Balanced Valve

 

Shower Only Configuration

This chart is for easy reference only and may NOT reflect the correct style(s) to match any specific Trim Kit


Trim Kit
1) Select your desired Trim Kit
+
Mixer - Rough-In Valve
2) Based on the Trim Kit and plumbing style, select the desired Rough-In Valve
+

Showerhead
3) Add any desired showerhead style: fixed, hand-held, slide bar, etc.
=

Complete Set
   
Shower & Tub Configuration

This chart is for easy reference only and may NOT reflect the correct style(s) to match any specific Trim Kit


Trim Kit
1) Select your desired Trim Kit
+
Mixer - Rough-In Valve
2) Based on the Trim Kit and plumbing style, select the desired Rough-In Valve
+
Tub Spout
3) Add matching Tub Spout with Diverter
+

Showerhead
4) Add any desired showerhead style: fixed, hand-held, slide bar, etc.
=


Complete Set
With Optional DIVERTER VALVE For Multiple Showerheads (and Tub Spout), Allowing INDEPENDENT CONTROL
This chart is for easy reference only and may NOT reflect the correct style(s) to match any specific Trim Kit, nor does it imply any specific outlet system(s).
Based on the type of Diverter Valve - Rough-In Valve installed, up to 3 separate outlet systems may be controlled (i.e. fixed showerhead(s), hand-held shower, slide bar shower, body sprayers and/or tub spout). See Shower Diverter (1/2" Ports) for details

Mixer - Trim Kit
1) Select your desired Trim Kit
+
Mixer - Rough-In Valve
2) Based on the Trim Kit and plumbing style, select the matching Rough-In Valve
+
Diverter - Trim Kit
3) Add matching 1/2" Diverter Valve Trim Kit
+
Diverter Valve - Rough-In Valve
4) Add desired 1/2" Diverter Valve Rough-In Valve
=

Complete Set
Additional documents, specific for older versions of this item, may be available for review/download on our DOWNLOADS server.

Write a review

Please login or register to review